Sticky Wet Soils? Try Adding a WD-40 Holster

This article originally appeared in the AGVISE Laboratories Fall 2024 Newsletter.

Do you have challenges collecting good quality soil cores in sticky wet soils? You are not the only one! WD-40 has been the soil probe lubricant of choice for over 30 years to help obtain better quality soil samples. University researchers have also tested WD-40 and found it does not contaminate soil samples.

Spraying WD-40 on your soil probes with the spray cans can get messy inside the pickup cab. A smart idea to make the WD-40 application process simpler and cleaner is making a WD-40 holster with some PVC pipe. The PVC pipe holster lubricates the soil probe with WD-40 between each soil core and also keeps the soil probe within easy reach. The clever idea came from a client who had spent too much time fiddling with WD-40 spray cans and losing them underneath the pickup seat.

The WD-40 holster is made from 2-inch diameter PVC pipe with a cap glued on the bottom and a threaded fitting on the top with a screw-in plug for storage when not in use. The PVC pipe should be fastened so that the open end faces the soil sampler and the soil probe can be easily placed into the pipe. Fill the PVC pipe with about 3-4 inches of WD-40 in the bottom. With the PVC pipe opening near the hole in the pickup floor, any excess WD-40 drops coming off the soil probe will go down the hole and reduce the mess of spraying WD-40 in the pickup cab.